A combined intumescent file and smoke seal which is heat activated. It is unobtrusively set into a machined groove (30x7mm) around the perimeter of timber frame or door edges.

There are a variety of trim selections available for the seal and it can be rebated in the latch area to allow the continuation of the fin section of the seal past the latch area. The smoke seal is achieved by a pair of silicon fins that seal between the door and the frame.

Dependent on application, fire ratings of one to two hours have been certified by fire door manufacturers using RP63 intumescent fire and smoke seal.

Location: Morticed into the door or frame around stiles and head.

Min/Max Gap 2 to 3mm.

Seals Sizes 2100mm & 2400mm.

Standard Finish: Aluminum anodized 15 microns. Satin Clear (Silver), Bronze Finish.

Fixing Method: Adhesive (by the installer).

Seal Sizes: Intumescent infill.

Used in conjunction: Raven Si rated door bottom smoke seals or nylon brush strip seals for a pivot.

Trim Selection: